ATV / UTV / SXS. Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery.
Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. Brand new aftermarket voltage regulator rectifier. Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.Higher grade of electric components. The quality exceeds the OEM equipment.
We have even included the opposite connector (main harness side) as we know these are often melted corroded defective and a major cause for repetitive electrical issues. All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.Dimensions: Width: 70 mm Length: 81 mm Height: 28 mm Wires length: 254 mm Fixation holes center to center: 60 mm. Other specifications: Number of plugs: 2 Number of pins: 7 Number of wires: 7 Minimum Charging Voltage: 14.5V +- 0.5V Maximum Charging Current: 50A/500W Open Circuit Voltage: 15V Operation Temperature: -20? Before installing your new voltage regulator rectifier. Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator rectifier. Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.
This item is in the category "Automotive\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Regulators". The seller is "rmstator-canada" and is located in this country: CA.